Carbon+M5 anti-odors filter set V200, V200E

SKU: P000061

34,00 €

Original filter set with activated carbon for OXYGEN C series O3 heat recovery ventilation units. Effectively neutralizes unwanted odors.

 

Carbon filter – for unwanted odors
Carbon (EN 779:2012) / ePM1 55-70% (ISO 16890) for filtering air supplied into the premises.
Contains activated carbon, which efficiently absorbs unpleasant environmental odors, harmful gaseous pollutants, and certain chemical vapors.

+

M5 filter – protection for the ventilation unit
M5 (EN 779:2012) / ePM10 55% (ISO 16890) for filtering exhausted air from the premises.
Effectively protects the heat recovery ventilation unit from damage.

 

We recommend to replace the filter set at least every 4 months.

Compatible with OXYGEN Easy and X-Air C series O3 heat recovery unit models:
V200, V200E

 

ATTENTION! Using non-original filters may risk damaging the heat recovery ventilation unit and contaminating the entire ventilation system.

Category:

Details

+
Filters location

+
Replacing filters

Replacing air filters:

  • Shut down the Unit by control panel, make sure that fans have completely stopped
  • Open the lid of the filter, that you intend to change, marked by “OXYGEN” by firmly gripping
    it and pulling out
  • Use fabric handle to remove a filter
  • Insert a new filter, following ventilation flow direction indicated on filter frame – it should point
    towards center of the Unit
  • Firmly push the lid of the filter back to its place. Make sure it was tightly inserted into the Unit
    housing
  • Turn on the Unit
  • Reset filter lifetime meter, refer to sections 9.1.7 “Filter menu”, 9.2.3 “Settings menu” or 9.3.5
    “Resetting the filter lifetime meter” of Installation and operation manual, depending on type
    of controller being used.
+
Documents

OXYGEN V series manual

PDF

Related products