M5+M5 O1 – standard filter set for C series

Standard filter set for OXYGEN C-series O1 models. Suitable for use in all seasons.

18,98 

Filter M5 – for recuperator protection
M5 (EN 779:2012) / EPM10 50% (ISO 16890) 0.3-10 µm diameter particles, 50% efficiency

For filtering exhaust air from the room, protects the recuperator against damage

Recommended to be replaced at least every 6 months

+
Filter M5 – for everyday protection of your home
M5 (EN 779:2012) / EPM10 50% (ISO 16890) 0.3-10 µm diameter particles, 50% efficiency

For the filtration of incoming air, for the daily protection of your home

We recommend replacement at least every 6 months

Suitable for OXYGEN X-Air C-Series O1 ventilation units: C180, C180E, C200, C200E, C250

Details

+
Filters location

+
Replacing filters

Replacing air filters:

  • Shut down the Unit by control panel, make sure that fans have completely stopped
  • Open the lid of the filter, that you intend to change, marked by “OXYGEN” by firmly gripping
    it and pulling out
  • Use fabric handle to remove a filter
  • Insert a new filter, following ventilation flow direction indicated on filter frame – it should point
    towards center of the Unit
  • Firmly push the lid of the filter back to its place. Make sure it was tightly inserted into the Unit
    housing
  • Turn on the Unit
  • Reset filter lifetime meter, refer to sections 9.1.7 “Filter menu”, 9.2.3 “Settings menu” or 9.3.5
    “Resetting the filter lifetime meter” of Installation and operation manual, depending on type
    of controller being used.
+
Documents

OXYGEN C series manual

PDF