M5+M5 standard filter set V400, V400E, V500, V500E, V600
40,00 €
Original standard filter set for OXYGEN C series O2 heat recovery ventilation units. Suitable for use in all seasons.
M5 filter – everyday protection for your home
M5 (EN 779:2012) / ePM10 55% (ISO 16890) for filtering air supplied into your premises.
Effectively protects your home from various particles no smaller than 0.3µm. Reduces dust accumulation on furniture, floors, and in the air, making it easier to keep your home clean.
+
M5 filter – protection for the ventilation unit
M5 (EN 779:2012) / ePM10 55% (ISO 16890) for filtering exhausted air from the premises.
Effectively protects the heat recovery ventilation unit from damage.
We recommend to replace the filter set at least every 6 months.
Compatible with OXYGEN Easy and X-Air C series O2 heat recovery unit models:
V400, V400E, V500, V500E, V600
ATTENTION! Using non-original filters may risk damaging the heat recovery ventilation unit and contaminating the entire ventilation system.
Details
Replacing air filters:
- Shut down the Unit by control panel, make sure that fans have completely stopped
- Open the lid of the filter, that you intend to change, marked by “OXYGEN” by firmly gripping
it and pulling out - Use fabric handle to remove a filter
- Insert a new filter, following ventilation flow direction indicated on filter frame – it should point
towards center of the Unit - Firmly push the lid of the filter back to its place. Make sure it was tightly inserted into the Unit
housing - Turn on the Unit
- Reset filter lifetime meter, refer to sections 9.1.7 “Filter menu”, 9.2.3 “Settings menu” or 9.3.5
“Resetting the filter lifetime meter” of Installation and operation manual, depending on type
of controller being used.